Results 1 to 4 of 4

Thread: Riveted Wheels

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Riveted Wheels

    Here is some interesting wheel trivia. A mechanical engineer friend of mine at work has a 1967 Fairlane and he is an amazing source of of information on old Fords. He told me that prior to approximately 1966 the center spokes on wheels were riveted to the rim. After somewhere around 1966 they were welded.

    I have 1963 Falcon with a 260 V-8 that has 13-inch wheels with five lugs (Six cylinder Falcons have 13-wheels with four lugs). I pulled the spare tire out of my trunk and saw that my friend was indeed correct. My wheels have three rivets securing each of the four spokes to the rim. I would have never noticed that if he had not mentioned it.

    Here is the back side of my 1963 13-inch 5-lug 4-spoke wheel:

    Spare tire and wheel 2-19-2016 002.jpg

    Close up of rivets. The original inspector's "188" paint-pen mark is still visible:

    Spare tire and wheel 2-19-2016 003.jpg

    Falcon wheels probably changed to a welded design by 1966.
    __________________
    Last edited by ew1usnr; February 20th, 2016 at 03:07 AM.
    Dennis Pierson
    Tampa, FL
    "The Wonder Falcon"

    '63 Futura Hardtop (260, Ford-O-Matic, bench seat)

Similar Threads

  1. Pre-1964 Wheels?
    By ontheroad68 in forum Tech Talk
    Replies: 2
    Last Post: July 11th, 2013, 01:06 PM
  2. Wheels and tires
    By doghows in forum Tech Talk
    Replies: 10
    Last Post: October 9th, 2012, 08:16 AM
  3. Rear Wheels
    By Voodoofalcon in forum Tech Talk
    Replies: 4
    Last Post: November 18th, 2011, 01:41 PM
  4. 14 Inch Wheels
    By Kelly in forum Parts Wanted
    Replies: 0
    Last Post: July 18th, 2011, 08:24 PM
  5. Falcon wheels
    By joe demoruelle in forum Tech Talk
    Replies: 11
    Last Post: May 18th, 2011, 02:09 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •