Help.. I need to order shackle bushings and all I can find is complete shackle kits. I found a set from energy suspensions and it was wrong when I got it?? Any body have a part # for these or an idea where I can get some? Thanks Steve...
Help.. I need to order shackle bushings and all I can find is complete shackle kits. I found a set from energy suspensions and it was wrong when I got it?? Any body have a part # for these or an idea where I can get some? Thanks Steve...
I've always had good luck with ESPO:
http://www.springsnthings.com
Only drawback is you need to call or request a quote for pricing. Old Skool!
Kenny Likins
Ballard, Seattle, WA
www.redfalken.com
`62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)
Steve,
What is the hole diameter you need? I have three new sets of bushings and one new shackle kit is with one of them. I know I need one set (I have not looked to see which yet), but the two loose sets I have one is smaller than the other. So you may get lucky if the size I don't need is the size you do need. Measure and let me know.
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
Best measurements I have are: ID of shackle is just shy of 1.5" and over all length is right at 2". Hope that makes sense. I called energy suspension and they do not make one for the Falcons?? But I have there sizing chart, maybe something will fit if yours don't. Thanks
What I need is to fit the new leaf springs I got. So I will shift some focus tonight when I get home to see what it is I have and what I need and will let you know if I have any leftovers..
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
Also - are the hanger brackets and the leaf eye the same inside diameter? I have to check this myself tonight... as a matter of fact.
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
Bookmarks