Rainier Falcons > The FalconForum  

Go Back   Rainier Falcons > The FalconForum > Classified > Parts Wanted

Reply
 
Thread Tools Display Modes
  #1  
Old 03-17-2007, 03:50 PM
Learning Fast...
Guest
 
Posts: n/a
Rear End Needed

Gentlemen:

I am searching for a used rear end for a stock 1968 4DR Futura. The existing one died violently. 6cyl 170CID, (at least that's what I thought, recently decoding the VIN indicates a 200CID...I'll check on this futher).

Please let me know if any futher specs are required.

Thanks for any help you can provide,

Derek
La Conner, WA
Reply With Quote
  #2  
Old 03-17-2007, 06:57 PM
pbrown's Avatar
pbrown pbrown is offline
Administrator
 
Join Date: Sep 2006
Location: Seattle
Posts: 1,322
Blog Entries: 21
It is an 8" rear end? If so you should be able to find a complete center section easily.
__________________
Patrick Brown
331 Stroker / T5 / 8" / Wilwood Disks / RRS R&P Steering / Megasquirt EFI

Reply With Quote
  #3  
Old 03-18-2007, 09:35 AM
redfalken's Avatar
redfalken redfalken is offline
Administrator
 
Join Date: Sep 2006
Location: Seattle
Posts: 1,612
Blog Entries: 5
Here's a link to a photo that shows the 8" and 7.25" side by side. An 8" would be much easier to find parts for. I found mine at the Pull-a-Part up in Lynnwood.

http://www.redfalken.com/pages/rearend.html
__________________

Kenny Likins
Ballard, Seattle, WA
www.redfalken.com

`62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)
Reply With Quote
  #4  
Old 03-18-2007, 04:10 PM
malodin malodin is offline
New Forum User
 
Join Date: Mar 2007
Location: auburn Wa
Posts: 28
man i wish i had seen this about a month ago i just let a stock 6cyl rearend go with the 68 2dr i parted out, oh well. there is a guy in everett that has a 4dr for 200.
Reply With Quote
  #5  
Old 03-27-2007, 12:14 PM
Learning Fast.....
Guest
 
Posts: n/a
Thank You

Gentllemen:

Thanks for your time and information in your replies. I think I found a replacement in Vancouver WA, and will be making a trip there soon to verify.

Pictures of the problem rear end:
http://pg.photos.yahoo.com/ph/hiquad...atch/my_photos

Thanks again for the info. I'll post again if the part hunt in Vancouver doesn't work out.

Sincerely,

Derek
La Conner, WA
Reply With Quote
  #6  
Old 03-27-2007, 02:05 PM
redfalken's Avatar
redfalken redfalken is offline
Administrator
 
Join Date: Sep 2006
Location: Seattle
Posts: 1,612
Blog Entries: 5
If it's a 7.25", there's one in Puyallup for $20. It's on craigslist:

http://seattle.craigslist.org/tac/pts/297723678.html
__________________

Kenny Likins
Ballard, Seattle, WA
www.redfalken.com

`62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)
Reply With Quote
  #7  
Old 04-06-2007, 12:49 PM
Murff
Guest
 
Posts: n/a
If you are still looking I have an 8" out of my '68 that I don't need.

I saw this post this morning on my first visit to this site and decided I had better join just so I could reply and maybe save you a trip to Vancouver. I'm in Federal Way which should be a little closer.

Have some other left over '68 stuff, too. Mostly interior and the like. I'll be at Pacific Raceways tomorrow (4/7) but should be home most the day on Sunday.

Let me know.

Murff
Reply With Quote
Reply

Bookmarks

Tags
None

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 12:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.