Page 1 of 3 123 LastLast
Results 1 to 15 of 37

Thread: Tech Day Scheduled 2-25-2012

  1. #1

    Tech Day Scheduled 2-25-2012

    Hey all-

    Bill Williams would like to host a tech day at his place on the 25th of February. He's going to be pulling the motor out of his 65 hardtop. He's got a lot of room on his newly poured slab, which is covered and screened in against the weather. There's room for other people too to come and do something on their car with the help of others.

    Bill will need to fill in the fine details of address and time. It was mentioned that he was going to supply food and drinks.

    Hope you can make it.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  2. #2
    Join Date
    Feb 2007
    Location
    Fredrickson
    Posts
    977
    Count me in.


    Gene Smith
    Fredrickson, WA
    '65 Ranchero Deluxe
    302, EFI, 4-Spd
    Granada Discs

  3. #3
    Join Date
    Aug 2009
    Location
    Sequim
    Posts
    2,117
    I will start planning. If weather holds I will give it a try. Fingers crossed..

  4. #4
    So where in this world of falcons does bill live in? If it's not to far I would like to help also....jh

  5. #5

    Tech Day

    Yes everyone is invited to my house on the 25th of Feb for a tech day. I live in the Silver Lake area of South Everett. My address is ;
    3200 118th Pl. SE
    Everett WA 98208
    Its the 128th St exit off I-5 , head east to Bothell-Everett hiway (also called 19th ) then North (left) on 19th to 116th, right on 116th, go about 1 mile, then right on 31st , take a left on 118th and my house is first driveway on the right.

    I was thinking of a 9:00am start time. And yes I will provide food and drinks (hope sandwiches,chips and sodas are okay with everyone). See you here! My cell # is (206) 391-6604 in case anyone gets lost. Bill
    Bill Williams

    '65 Ford Falcon

  6. #6
    Darn it... I won't be over to the darkside till Sunday night..

    I'll catch ya all at the march meeting for sure...

    Have fun... guys

    Nathan
    Nathan and Jen Cooper
    63 Sprint Hardtop "Dollora"
    63 Super deluxe squire wagon "Mayble"
    * this spot is vacant for future project*

  7. #7
    Join Date
    Aug 2009
    Location
    Sequim
    Posts
    2,117
    If I can make this one do I need to bring any cutting tools?? I have a new blue tip wrench I am dying to use...
    Just Kidding your cars are much nicer than the junk I work with over here. I will just try to drive a falcon this time. Fingers crossed.

  8. #8
    Join Date
    Dec 2006
    Location
    Mill Creek
    Posts
    1,224

    Tech Day Scheduled 2-25-2012

    Sorry, I can't make it. I have to go to Tucson for the next three months and get the moss removed from the backside of my body. You know I would rather stay here and help, but. Anyway, have a good time and take care. See you at the next meeting in June. Badbird, Larry
    Larry Smith
    1964 Futura
    347 stroker



  9. #9
    Join Date
    Nov 2010
    Location
    Seattle
    Posts
    300
    I will be there as well. Post any extra tools you may need, I'm sure we have anything you can think of among us.
    Brian
    '67 Falcon Bus/240/C4/Offy DP/MSD Duraspark II/Holley 4160

  10. #10

    Gentle reminder

    Just pinging this thread. Let us know if you can make it to the tech day this weekend. Bill has helped at just about every tech day we've had so far, so let's return in-kind and help him out and get his motor pulled and on the engine stand.





    Last edited by Luva65wagon; February 22nd, 2012 at 03:28 PM.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  11. #11
    I'll be there to help. Count me in!
    Bill Proctor .. 1963 Falcon Sprint. Looking forward to learning new things.

  12. #12
    Hey, very close to my house, I'd love to attend. I look forward to meeting everyone and help if I can or just observe.

    Jim Jarriel
    63 Ford Falcon Futura Convertible

  13. #13
    I posted a short notice on our Facebook page with a link to this thread. That's where Jim saw it so it must be working!

    I'm still hoping to come up for a few hours but have an unexpected house guest so I'm playing it by ear for now...

    Kenny Likins
    Ballard, Seattle, WA
    www.redfalken.com

    `62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)

  14. #14
    Join Date
    Feb 2007
    Location
    Fredrickson
    Posts
    977
    Bring your house-guest along & we'll shove some wrenches in his/her hand.


    Gene Smith
    Fredrickson, WA
    '65 Ranchero Deluxe
    302, EFI, 4-Spd
    Granada Discs

  15. #15
    It's my M-I-L who's idea of fixing a courtesy light that won't go off is to reach under the dash and start yanking wires until it does go off!

    Trust me...you DO NOT want her wrenching anything!! If nothing else I'll come up to get a little peace & quiet!

    Kenny Likins
    Ballard, Seattle, WA
    www.redfalken.com

    `62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)

Similar Threads

  1. Club Meeting 1/25/2012
    By Luva65wagon in forum Events and Announcements
    Replies: 28
    Last Post: January 25th, 2012, 02:25 PM
  2. Tech day list
    By Rustorod in forum Tech Talk
    Replies: 0
    Last Post: May 27th, 2010, 06:01 PM
  3. Tech day suggestion
    By InkedForLife in forum Events and Announcements
    Replies: 0
    Last Post: February 22nd, 2010, 08:04 AM
  4. Tech Video
    By pbrown in forum Chit Chat
    Replies: 2
    Last Post: October 23rd, 2009, 10:20 PM
  5. Tech day in late May?
    By Sedanman in forum Events and Announcements
    Replies: 7
    Last Post: May 12th, 2007, 08:47 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •