Rainier Falcons > The FalconForum  

Go Back   Rainier Falcons > The FalconForum > General Forums > Tech Talk

Reply
 
Thread Tools Display Modes
  #1  
Old 02-24-2013, 08:00 PM
ew1usnr's Avatar
ew1usnr ew1usnr is offline
Senior Forum User
 
Join Date: Dec 2012
Posts: 844
Vent window latch shaft - Do I tap it with a hammer?

Please see the two attached pictures. There is a little shaft that is sticking out from my wing vent window and is hanging up on the vent window gasket. Is the shaft supposed to be flush the latch? Can I tap it with a hammer to drive it further in?

Thanks. Dennis in Tampa.

DCP_3768.JPG

DCP_3775.JPG

Last edited by ew1usnr; 02-24-2013 at 08:16 PM. Reason: mis-spelling
Reply With Quote
  #2  
Old 02-25-2013, 08:28 AM
falcon cobra falcon cobra is offline
Senior Forum User
 
Join Date: May 2008
Location: Kirkland
Posts: 602
Yes , it should be in farther, look at the vent on the other side..jh
__________________
Reply With Quote
  #3  
Old 02-25-2013, 08:45 PM
SmithKid's Avatar
SmithKid SmithKid is offline
Paid Chapter Member
 
Join Date: Feb 2007
Location: Everett
Posts: 925
One of mine had been "tapped" on by someone before me and was peened over enough that it wouldn't go all the way in. I just replaced it with a standard roll-pin and all is now well.
__________________


Gene Smith
Everett, WA
'65 Ranchero Deluxe
302, 4-Spd
Granada Discs
Reply With Quote
  #4  
Old 02-25-2013, 09:30 PM
Jeff W's Avatar
Jeff W Jeff W is offline
Super Moderator
 
Join Date: Oct 2006
Location: Seattle
Posts: 1,321
Blog Entries: 3
This one looks damaged as well. I would be afraid of damaging the pot metal latch. As Gene did I would gently drive it out from the backside with a pin punch and small taps with a hammer and bring it to a hardware store to match a replacement. I'm not looking at mine right now but think you have access from the back of the through hole. If you have help use the third hand to hold something like a second hammer or a chunk of wood against the latch to give it some backing so you don't snap it off the window frame.
__________________

Jeff Watson
Seattle, WA
'63 Tudor Wagon (170 - 3 spd.)

Last edited by Jeff W; 02-25-2013 at 09:37 PM.
Reply With Quote
  #5  
Old 02-01-2014, 05:44 PM
ew1usnr's Avatar
ew1usnr ew1usnr is offline
Senior Forum User
 
Join Date: Dec 2012
Posts: 844
Wing vent window pin.

The pin that holds my wing vent window handle in place works its way out and I have had to keep tapping it back in place. I tried several places to get a replacement slotted spring pin, also known as a roll pin or "C" pin, for the vent window, but have not been able to find the right size.


This morning, I pulled the pin out the vent window handle pin, put some Lok-Tite Super Glue on it, and then tapped it back in place with a hammer. It now seems to be fixed! I opened and closed the vent window a number of times today and the pin stayed in place.
__________________
Dennis Pierson
Tampa, FL
"The Wonder Falcon"

'63 Futura Hardtop (260, Ford-O-Matic, bench seat)

Last edited by ew1usnr; 02-02-2014 at 06:04 AM.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Drive shaft falcon cobra Parts Wanted 8 03-23-2011 09:41 PM
170 vent question oldford63 Tech Talk 2 12-11-2008 10:49 AM
Vertical Vent Window Tool NEEDED SmithKid Tech Talk 3 06-19-2008 09:18 PM
Vent window seals Ranchero_65 Tech Talk 1 08-01-2007 08:55 AM
Rocker Shaft MacDee Tech Talk 3 01-13-2007 12:40 PM


All times are GMT -7. The time now is 04:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.