Rainier Falcons > The FalconForum  

Go Back   Rainier Falcons > The FalconForum > Classified > Parts Wanted

Reply
 
Thread Tools Display Modes
  #1  
Old 10-02-2014, 03:03 PM
Nathan289's Avatar
Nathan289 Nathan289 is offline
Moderator
 
Join Date: Oct 2006
Location: Deer Park
Posts: 1,100
Blog Entries: 1
All Points Bulletin. Rocker arm assembly needed

Hello,

So motor is all rebuilt.. good compression, good oil psi.

Has a rattle or even a knock almost..

So I check this and that and have just about eliminated everything until Roger and my machinist say check the rocker arm shaft..

So needless to say mine is bent has a bow in it. And is scored really bad from lack of oil or whatever..


So I need a rocker arm shaft assembly for a mechanical lifter setup..

Shoot me a pm if anyone has a spare
__________________
Nathan and Jen Cooper
63 Sprint Hardtop "Dollora"
63 Super deluxe squire wagon "Mayble"
* this spot is vacant for future project*
Reply With Quote
  #2  
Old 10-03-2014, 06:39 PM
Luva65wagon's Avatar
Luva65wagon Luva65wagon is offline
Chapter President
 
Join Date: Oct 2006
Location: Lynnwood
Posts: 4,411
Blog Entries: 4
Nathan - I found one, but it's not the good one I had - so it is probably on a Comet, best guess.

I have it boxed up and will ship it to you tomorrow and hopefully you can use it.
__________________
Roger Moore

63 "Flarechero"
powered by: '65 289-V8 | T5 | 8" TracLoc rear


Reply With Quote
  #3  
Old 10-03-2014, 09:22 PM
Nathan289's Avatar
Nathan289 Nathan289 is offline
Moderator
 
Join Date: Oct 2006
Location: Deer Park
Posts: 1,100
Blog Entries: 1
Roger,
Thanks..

I got mine all measured this morning.

The shaft is .769 or .011 below specs plus it bent.
I have 10 rockers that are use able and I have 2 that are at limits.

Worst case scenario I could buy a new shaft and scavenge a couple rockers from yours.

What do I owe you for shipping?
__________________
Nathan and Jen Cooper
63 Sprint Hardtop "Dollora"
63 Super deluxe squire wagon "Mayble"
* this spot is vacant for future project*
Reply With Quote
  #4  
Old 10-03-2014, 09:41 PM
Luva65wagon's Avatar
Luva65wagon Luva65wagon is offline
Chapter President
 
Join Date: Oct 2006
Location: Lynnwood
Posts: 4,411
Blog Entries: 4
Don't worry about it. I suspect someday I'll need something you have and you can return the favor. I hope there are good bits on it for you.
__________________
Roger Moore

63 "Flarechero"
powered by: '65 289-V8 | T5 | 8" TracLoc rear


Reply With Quote
Reply

Bookmarks

Tags
None

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
I found the leak points. ew1usnr Tech Talk 7 02-28-2015 03:10 PM
Falcon run assembly party doghows Events and Announcements 16 10-19-2013 10:15 PM
Final assembly party doghows Events and Announcements 44 09-29-2013 09:22 PM
Clutch Pedal Assembly BadBird Parts Wanted 8 03-22-2013 08:41 AM
Rocker Shaft MacDee Tech Talk 3 01-13-2007 12:40 PM


All times are GMT -7. The time now is 08:48 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.