PDA

View Full Version : Free headliner,hinge pin bushing set,molding clips



642dw
April 23rd, 2014, 10:28 AM
The members of this forum have been good to me when it came to asking for parts so I thought I could possible repay the good deeds by offering these parts to someone that can use them, we all know that it is expensive to build a car.

I have a brand new headliner that is black in color that was supposed to fit a 60-65 Falcon 2 door wagon (probably a 4 door as well) but the bows were not in the correct place for my car so I figure it may be correct for a 60-63 wagon. Here are the measurements from the back to the front of the bow centerlines so you can measure your car and see if it will work for you.

First bow from back of car is 14"-12 1/2"-13"-13"-13 1/2"-13 1/2"-9 1/4"
7 bows total I did put 2 cuts at the c pillar to get the headliner to wrap around pillar but they are not deep so should not affect fitment.

Also have a new door hinge pin bushing set up--4 pins and 8 bushings

A new rocker panel molding clip set 12 clips total the clips measure 2 3/8" x 1 1/4"

I will have more free items as car gets nearer to completion.

All I ask is for you to pay shipping of $15.00 for headliner and a couple dollars each for the other items.

Mike

BPVan
April 23rd, 2014, 03:04 PM
I'll need to check but if the hinge pins fit my van I may take you up on those.

642dw
April 23rd, 2014, 03:33 PM
The pin appears to be 3/8" diameter and 2 1/2" long

Nathan289
April 24th, 2014, 04:36 AM
Any part numbers on the box for the headliner?

642dw
April 24th, 2014, 08:39 AM
No part numbers on the box for headliner, it was just one I bought off of ebay from seller classicautotrimnv

http://www.ebay.com/itm/1960-1961-1962-1963-1964-1965-FORD-FALCON-STATION-WAGON-HEADLINER-USA-MADE-/121260439622?pt=Motors_Car_Truck_Parts_Accessories&hash=item1c3baf7846&vxp=mtr

Race302
July 19th, 2017, 11:18 AM
Mike if you still have the headliner that will fit a 62 door wagon, I need one. and the front 3 bows. please contact me at rtreyno@yahoo.com
RT