PDA

View Full Version : engine color



falcon cobra
July 25th, 2008, 09:31 AM
I have my old 170 6cyl all hot tanked and clean and now I need to paint it and I don't really know what color it was from the factory other than the valve cover was red or orange.........thanks for any help..:confused:
john h

Luva65wagon
July 25th, 2008, 09:48 AM
John,

I'll double check this when I find the book, but as I recall the engine block and pan are low-gloss black and the valve cover is Ford red.

What you going to do with the 170 motor? Coffee table? Buy that white falcon and put it in there? :BIRTHDAY:

falcon cobra
July 25th, 2008, 11:43 AM
I am going to mock it up and put it in my museum, but now I can't seem to locate the dist,carb,or the old water pump...guess I'am not off to a very good start....ps, I did find the pan.:rocker:

redfalken
July 25th, 2008, 12:56 PM
Here's one of the best lists I've found so far if you're trying to get something to look stock:

http://www.tffn.net/1960.html

And it must be true...I found it on the internet!

falcon cobra
July 25th, 2008, 01:47 PM
Thanks kenny, that will work just fine,,it's quite a list ...thanks again..
john h