One thing that has always bothered me about Falcons is their single turn signal indicator. I was determined to make mine "normal" - so I did. It was easier to do considering I had a couple clusters to play with, so I experimented on the worst and perfected it for the second. Turned out pretty nice.
The hardest part was getting the big hole drilled considering I had to eat at the screw location for the voltage regulator - I had to locate it just starting on the edge of the existing screw hole. Though not shown in these pictures, the regulator is just to the right of the original location and still indexes off one of the bumps used to keep it from rotating on the screw.
For those that don't know, the wires to have both left and right turn indicators are there, they just feed them both to the same bulb and the ground path is back to the main bulbs. If you split these wires out to two individual bulbs (w/grounds at the dash) - that's all it takes.
Reply With Quote
Bookmarks