I'll be trying to roll the Falcon out of the garage in the morning to paint the dash. I can't get both doors open at the same time in my small garage. There is no steering wheel or column installed so turning will be tricky. Any volunteers?
Patrick Brown
331 Stroker / T5 / 8" / Wilwood Disks / RRS R&P Steering / Megasquirt EFI
What time? I could come over for awhile.
Kenny Likins
Ballard, Seattle, WA
www.redfalken.com
`62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)
I'll get started at about 9:30AM.
I was prepping and painting the backside of the glove box door and a few other small parts. It didn't go well. I washed them with soap and water and then wiped them down with PPG wax and grease remover. Still I had massive fisheyes. I'll have to redo them tomorrow.
Patrick Brown
331 Stroker / T5 / 8" / Wilwood Disks / RRS R&P Steering / Megasquirt EFI
The color is on the dash. I'm just waiting for it to dry so I can get the clear on there.
Patrick Brown
331 Stroker / T5 / 8" / Wilwood Disks / RRS R&P Steering / Megasquirt EFI
What fun. Will look very nice once it's all in with the new dash.
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
Patrick how did the gauge cluster turn out?? Was the color good on the panel? Like to see how it all turned out.
Here is what it looks like so far. I have a problem with the column so it's going back to Ididit for modifications. I'll be installing the old column to get me rolling again until it's back.
The gauges look great. The powder coated bit is seen only from the side.
Patrick Brown
331 Stroker / T5 / 8" / Wilwood Disks / RRS R&P Steering / Megasquirt EFI
Kenny Likins
Ballard, Seattle, WA
www.redfalken.com
`62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)
Looks nice, are you going to the Mini Regional? Love to see all that in person.
I just have the old screws in there.Looking good! Are you going to weld up those holes from the old pedal?
They are going to replace the tube and shaft. I'll need to repaint.So does that mean they'll add something to the end and you won't need to repaint?
Patrick Brown
331 Stroker / T5 / 8" / Wilwood Disks / RRS R&P Steering / Megasquirt EFI
Bookmarks