Page 2 of 12 FirstFirst 1234 ... LastLast
Results 16 to 30 of 178

Thread: It's the wife's fault!!!

  1. #16
    Tore the engine apart. Got it freed up.

    A little rust in the cylinders. The wrist pins are frozen.

    The oil pump is fomoco with a 1962 part number
    the bearings are ford as well abd show even wear.. but they are worn to the copper.
    Attached Images Attached Images
    Nathan and Jen Cooper
    63 Sprint Hardtop "Dollora"
    63 Super deluxe squire wagon "Mayble"
    * this spot is vacant for future project*

  2. #17
    Jen pulled carpet and removed sound Deadner.

    Need to go get my cherry picker / engine hoist and pull the engine.

    There is 50 years of dirt on it. I scraped half an inch of crap off the timing cover just to get to the bolts.

    Need to order a toe board and one front pan.
    Attached Images Attached Images
    Nathan and Jen Cooper
    63 Sprint Hardtop "Dollora"
    63 Super deluxe squire wagon "Mayble"
    * this spot is vacant for future project*

  3. #18
    Join Date
    Oct 2006
    Location
    Seattle
    Posts
    1,431
    That is a very strange looking console ... where are the heads of the carriage bolts that hold on the hinge

    I think it is the wrong one and you should send it to me.

    What do you know about the history of the car? It doesn't look hacked up and a fun project.

    Jeff Watson
    Seattle, WA
    '63 Tudor Wagon (170 - 3 spd.)

  4. #19
    Join Date
    Oct 2006
    Location
    Seattle
    Posts
    1,431
    Quote Originally Posted by Nathan289 View Post
    Found a fomoco stamp on the generator.

    Has a weird pc valve???

    Also has a different radiator cap and master cylinder cap.
    I had that same weird pcv on my wagon. I was told it was the California Smog Version. It kept poppong out so I replaced it with Gary's old draft tube.

    My car was assembled in Sacramento.

    Jeff Watson
    Seattle, WA
    '63 Tudor Wagon (170 - 3 spd.)

  5. #20

    Wagon Detail

    Here is a cool (Australian) advertisement cross section of a 1963 Falcon Wagon. It says that the cargo area in the Squire wagons was carpeted rather than having a rubber mat.

    1963 Ford Falcon Wagon.jpg
    Dennis Pierson
    Tampa, FL
    "The Wonder Falcon"

    '63 Futura Hardtop (260, Ford-O-Matic, bench seat)

  6. #21
    The history of the car is really unknown to us.

    It is a Denver dso car. Built at the Loraine Ohio plant.

    From what I can tell we are the 4th owners.

    Let's work our way backwards. We bought it Saturday 04/26/2014

    Tony, The guy I bought it from. Purchased it in March 2010 from a Josh outside Delta Colorado.

    This is where the story gets uncertain. Story is josh who I supposed to be younger than me. Remembers seeing the car drive a round town as a kid. One day he finds it for sale and buys it. The car is a non runner at this time and Josh is going to restore it. Like everyone else, life gets in the way and he starts a family and the car gets sold.

    Someone put money into it, I'm not sure why.. it has new tune up parts, cap rotor, points, condenser, but original fomoco wires that has number six wire fried to a crisp.
    New starter and solenoid.

    A carburetor that has never been touched.. it was a ball of dirt, but it works.. I think.

    Not sure when the motor froze. But its been a non runner +4 years.

    The starter that still looks new has a Napa sticker on it dated 2009.

    the odometer says 115k I believe it. It still has biased ply tires on the rear.

    I have no idea if any of the electrics work.
    Nathan and Jen Cooper
    63 Sprint Hardtop "Dollora"
    63 Super deluxe squire wagon "Mayble"
    * this spot is vacant for future project*

  7. #22
    Quote Originally Posted by ew1usnr View Post
    Here is a cool (Australian) advertisement cross section of a 1963 Falcon Wagon. It says that the cargo area in the Squire wagons was carpeted rather than having a rubber mat.

    1963 Ford Falcon Wagon.jpg
    that's cool. I've never seen carpet in the cargo area.

    I have a blue rubber mat. Its still soft and plyable.

    Under it is the cleanest nicest looking floor pan I've ever seen in a falcon. At least in any of the ones I buy.
    Nathan and Jen Cooper
    63 Sprint Hardtop "Dollora"
    63 Super deluxe squire wagon "Mayble"
    * this spot is vacant for future project*

  8. #23
    Quote Originally Posted by Jeff W View Post
    I had that same weird pcv on my wagon. I was told it was the California Smog Version. It kept poppong out so I replaced it with Gary's old draft tube.

    My car was assembled in Sacramento.
    Sacramento? You mean San Jose? Milpitas to be exact..
    Nathan and Jen Cooper
    63 Sprint Hardtop "Dollora"
    63 Super deluxe squire wagon "Mayble"
    * this spot is vacant for future project*

  9. #24
    Join Date
    Oct 2006
    Location
    Seattle
    Posts
    1,431
    Quote Originally Posted by Nathan289 View Post
    Sacramento? You mean San Jose? Milpitas to be exact..
    San Jose... Yes. I bought it from Sacramento... Getting old.

    Jeff Watson
    Seattle, WA
    '63 Tudor Wagon (170 - 3 spd.)

  10. #25
    Looks like it should be a fun build.

    I always upgrade to PCV rather than draft tubes, but that looks like a draft tube feed into the top of the carb? Would probably have made for quickly gunked up carbs or air filter.

    Before you buy any parts for it - I'm going to be sort through all the stuff I have this week to prepare bringing it all to the swap meet. Would rather some of it go to club members if they need some of it. I'll inventory it so others can have an opportunity to get something they need.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  11. #26
    You happen to have a good clutch set?

    I know nothing about the transmission. . You still have those 2.77 trannies?

    I could use a console liner and latch catch.

    A correct cigarette lighter.

    Plus many more needs

    Pcv runs to air cleaner.
    Nathan and Jen Cooper
    63 Sprint Hardtop "Dollora"
    63 Super deluxe squire wagon "Mayble"
    * this spot is vacant for future project*

  12. #27
    May possibly have all that. I bought a supposedly rebuilt 2.77 transmission a couple weeks ago. Have not opened it up yet to see, but I have it for sale cheap. And having swapped to a V8 in the Ranchero I do have a low-low mileage clutch and various other tranny parts cheap as well.

    Make a list and I'll set what I have aside and we'll wheel and deal.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  13. #28
    Roger.

    I sold you a brand new clutch set about three years ago. That is why I did the laughing emoticon

    But I might need those things. I have no idea what condition they are in.

    I also gave you a 2.77 trans from a 61 falcon.

    How much for your transmission and clutch.parts?

    Im not sure there's enough room here to post a list of what I need.


    Oooh a tail light lenses for a 63.... do need one of those
    Nathan and Jen Cooper
    63 Sprint Hardtop "Dollora"
    63 Super deluxe squire wagon "Mayble"
    * this spot is vacant for future project*

  14. #29
    I got the humor.

    I'm still digging through this stuff, but the clutch disc and pressure plate were just removed. Have a few flywheels too. One I was going to use, but after breaking a bolt on the day of the swap I swapped the flywheel instead.

    I know I ended up with a transmission a few year back, probably for the swap meet since I don't recalling having a personal need for one. Not sure who finally got that one. So many parts have come through my hands. This one I paid for, but it wasn't much in light of the other things I got too.

    I have a tail light lens. Two, actually, but only one that's decent.

    I found a lighter too - does your knobs have the chrome insert?

    No console parts though.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  15. #30
    Chrome insurers? Good question.
    other than taking a picture of the console.
    And a quick look of the interior and saying YUK I have no idea if it has chrome knobs.
    I did notice the black cigarette lighter though. Wonder why a black knob stood out. Hmmm

    Here's a tough part to find that I can use... the spare tire cover..

    Im searching ebay... but no luck.

    I known of a parts car. I need to see if he still has it and wants to part it.

    I'll sit down and make a list one of these nights that I'm not too busy.

    Thanks roger
    Nathan and Jen Cooper
    63 Sprint Hardtop "Dollora"
    63 Super deluxe squire wagon "Mayble"
    * this spot is vacant for future project*

Similar Threads

  1. Nathan's wife's painted ranchero
    By Nathan289 in forum Show Off Your Ride
    Replies: 18
    Last Post: August 27th, 2008, 07:37 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •